BT Series Load Cell

The BT series load cell was developed for low or middle capacity applications. It has special alloy steel and shows high results in weighing performance.
This stainless steel and nickel-plated load cell is highly protected from external agents such as rain, dust, water that can make troubles for a good performance.
The BT load cell works with principle of bending beam. Due to that some vibrations appearing during the weighing process are muffled. That guarantees extremely accurate weighing result.
The cable output of the BT load cell is sealed to metal nipple. The protection level is IP67. The BT load cell is produced with 3 metres lengthwise screened cable.

General Application
- Packaging and filling machines
- Dosing system
- Band weighing machines
- Check weigher
- Tension control applications
- Platform scales with low capacity

Capacity
The BT load cell is produced in 10, 20, 50, 100, 200, 500 kg capacities

Technical Specifications

Type	BT
Accuracy class	C1	C3
Capacity (Emax)	10,20,50,100,200,500 kg
Minimum dead load	0% R.O
Rated output R.O	2,0 mV/V
Maximum number of load cell interval Nmax	1000	3000
Vmin	Emax/4000	Emax/10000
Emax / Vmin	4000	10000
Minimum dead load output return (MDLOR)	<0,0500 %R.O	<0,0167 %R.O
Zero balance	1 %R.O
Temperature effect on zero	<< 0,0070 %R.O/5°C
Temperature effect on output	< 0,0055 %R.O/5°C
Compensated temperature range	-10 /+40 °C
Temperature range safe	-30 /+70 °C
Maximum safe central overload	150 %R.O
Ultimate central overload	300 %R.O
Excitation	5 V
Input impedance	380±20 Ω
Output impedance	350±3 Ω
Insulation resistance	>1000 MΩ
Construction	Nickel plated alloy steel
Environmental protection	IP67
Cable type	2x2x0,22 mm
Cable length	3 m
Weight	0,6kg