HT(1) Series Load Cell

HT(1) type load cells are low profile. Work with principle of shear beam. They are available in 350 or 700 ohm. The flexure is made of a special alloy steel and it is ideal for low and middle capacity applications. HT(1) load cells were designed for both tension and compression applications. The sensing element is covered with special materials that isolate it from industrial environments. Stainless steel and nickel-plated HT(1) load cells are highly protected from external agents such as rain, dust, water that can make troubles for a good performance. They highly withstand to overloading and to the effects of off-axis loading.

Applications
- Material testing machine
- Lifting crane applications
- Various weighing applications

Capacity
The HT(1)series load cells are produced in 1,2,5,10,20,30,50,100 ton capacities

Technical Specifications

Type	HT(1)
Accuracy class	C1 1000d
Capacity (Emax)	1-2-5-10-20-30-50-100 T
Minimum dead load	0% R.O
Rated output R.O	2,0 mV/V
Maximum number of load cell interval Nmax	1000
Vmin	Emax/4000
Emax / Vmin	4000
Minimum dead load output return (MDLOR)	<0,0500 %R.O
Zero balance	1 %R.O
Temperature effect on zero	<< 0,0070 %R.O/5°C
Temperature effect on output	< 0,0055 %R.O/5°C
Compensated temperature range	-10 /+40 °C
Temperature range safe	-30 /+70 °C
Maximum safe central overload	150 %R.O
Ultimate central overload	300 %R.O
Excitation	5 V
Input impedance	760±60 Ω
Output impedance	700±6 Ω
Insulation resistance	>1000 MΩ
Construction	Nickel plated alloy steel
Environmental protection	IP67
Cable type	2x2x0,22 mm
Cable length	1-2-5T 3m
	10-20-30-50-100T 5m
Weight	1-2-5T 10-20T 30-50T 100T	? kg