HT(2) Series Load Cell

HT(2) type load cells are low profile. Work with principle of shear beam. They are available in 350 or 700 ohm. The flexure is made of a special alloy steel. The sensing element is covered with special materials that isolate it from industrial environments. Stainless steel and nickel-plated HT(2) load cells are highly protected from external agents such as rain, dust, water that can make troubles for a good performance.HT(2) load cells were designed for compressing, making it ideal for middle and high capacity applications. It was produced for silo-tank weighing and weighing platform. Low profile makes them ideal especially for that kind of applications in comparison with column type load cells. The HT(2) series load cells highly withstand to the effects of off-axis loading caused by wind. For tank and silo applications the mounting accessories are available. HT(2) load cells can be used in testing machine also.

Applications
- Tank and silo weighing applications
- Middle and high weighing platfroms
- Material testing machine

Capacity
The HT(2)series load cells are produced in 1,2,5,10,20,30,50,100 ton capacities

Technical Specifications

		Type	HT(2)
		Accuracy class	C1
		Capacity (Emax)	1-2-5-10-20-30-50 T
		Minimum dead load	0% R.O
		Rated output R.O	2,0 mV/V
		Maximum number of load cell interval Nmax	1000
		Vmin	Emax/4000
		Emax / Vmin	4000
		Minimum dead load output return (MDLOR)	<0,0500 %R.O
		Zero balance	1 %R.O
		Temperature effect on zero	<< 0,0070 %R.O/5°C
		Temperature effect on output	< 0,0055 %R.O/5°C
		Compensated temperature range	-10 /+40 °C
		Temperature range safe	-30 /+70 °C
		Maximum safe central overload	150 %R.O
		Ultimate central overload	300 %R.O
		Excitation	5 V
		Input impedance	380±20 760±40 Ω
		Output impedance	350±3 700±6 Ω
		Insulation resistance	>1000 MΩ
		Construction	Nickel plated alloy steel
		Environmental protection	IP67
		Cable type	2x2x0,22 mm
		Cable length	1-2-5T 3m
		Cable length	10-20-30-50-100T 15m
		Weight	10-20T : 3,5 kg